TM 9--2350--292--10
0102 00--1
OPENING, REMOVAL, INSTALLATION AND CLOSING OF ARMOR SKIRT
PANELS.
0102 00
THIS WORK PACKAGE COVERS:
Opening, Removal, Installation, Closing
INITIAL SETUP:
Tools and Special Tools
Adjustable wrench (item 40, Table 2, WP 0128 00)
Driftpin (item 11, Table 2, WP 0128 00)
Hammer (item 18, Table 2, WP 0128 00)
Auxiliary boom (item 1, Table 1, WP 0128 00) (For
removal and installation of panel)
Chain hoist (item 8, Table 1, WP 0128 00)
Personnel Required
Three
References
WP 0128 00
WP 0039 00
WP 0019 00
Equipment Conditions
Vehicle parked and engine shut down (WP 0019 00)
WARNING
CAUTION
Do not drive vehicle unless skirts are secured in the closed position with hinge pins in
place. Failure to comply may result in panel swinging and causing damage.
OPENING ARMOR SKIRT PANELS
Panels #1 and #8:
1. Remove two bolts (1), two lockwashers (2), and two flat washers (3) securing skirt panel against stop.
2. Open panel by hand.
1
2
3
1
2
3
1
2
3
4
5
6
7
8
