TM 9--2350--292--10
0102 00--2
OPENING, REMOVAL, INSTALLATION AND CLOSING OF ARMOR SKIRT
PANELS -- CONTINUED
0102 00
OPENING ARMOR SKIRT PANELS -- CONTINUED
Panels #2 through #7:
1. Remove two screws (4) from two stand--offs (5) and two hinge pins (6).
CAUTION
Do not use steel hammer or punch when removing hinge pins. Metal to metal con-
tact will mushroom hinge pin making it impossible to remove pin. Failure to comply
may result in damage to equipment.
2. Using brass drift punch and hammer, remove two hinge pins (6) from two panel hinges (7) and two standoffs (5).
3. Swing panels open by hand.
6
4
7
7
5
5