TM 9--2350--292--10
0103 00--2
TRACK TENSION ADJUSTMENT (OLD CONFIGURATION) -- CONTINUED
0103 00
NOTE
• If grease fitting will not take grease or continues to leak grease after one
minute, replace grease fitting.
• If relief valve works too easily, or if track adjusting link will not move, notify
unit maintenance.
• If grease under pressure comes out of valve at bottom of cylinder during ad-
justment, track adjusting link is extended too far. Remove one track shoe
(WP 0108 00) to shorten track and repeat track adjustment procedure.
• As track adjusting link moves, turn locknut to keep it close to cylinder as-
sembly.
• Removing a shoe from one track does not require removing a shoe from oth-
er track.
7. Loosen locking screw (7) about 3 1/2 turns.
8. Back off locknut (6) using spanner wrench.
6
7
