TM 9--2350--292--10
TRACK TENSION ADJUSTMENT (OLD CONFIGURATION) -- CONTINUED
0103 00
9. Pump grease into track adjusting link grease fitting (4).
10. Stop pumping grease when grease flows from relief valve (3).
11. Tighten track adjusting link locknut (6).
6
4
3
12. Disconnect grease gun adapter (5) from grease fitting (4).
13. Repeat steps 1 through 12 for other side of vehicle.
14. Alternately repeat steps 1 through 13 two more times for a total of three times for each side of vehicle.
15. Using spanner wrench, align nearest slot in locknut (6) with locking screw (7). Tighten locking screw (7) on track
adjusting link (2).
16. Using a screwdriver, lift up and hold valve pin (8), so grease flows out.
17. Catch grease in wiping rags.
18. Let valve pin (8) go when grease stops flowing.
19. Close and secure armor skirt panels #1 through #7 (WP 0102 00).
20. Repeat steps 15 through 19 for other side of vehicle.
6
7
2
4
5
3
8
0103 00--3/4 blank
