TRACK TENSION ADJUSTMENT (NEW CONFIGURATION)

TRACK TENSION ADJUSTMENT (OLD CONFIGURATION) (cont) - TM-9-2350-292-10_385

TRACK TENSION ADJUSTMENT (NEW CONFIGURATION) (cont) - TM-9-2350-292-10_387

TM-9-2350-292-10 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
364

TM 9--2350--292--10 0104 00--1 TRACK TENSION ADJUSTMENT (NEW CONFIGURATION) 0104 00 THIS WORK PACKAGE COVERS: Adjustment INITIAL SETUP: Tools and Special Tools Wire brush Grease gun adapter (item 2, Table 2, WP 0128 00) Grease gun (item 17, Table 2, WP 0128 00) Materials/Parts Rags, wiping (item 45, WP 0130 00) Grease (item 16, WP 0130 00) Personnel Required Three References WP 0128 00 WP 0130 00 WP 0019 00 WP 0102 00 WP 0108 00 1. Move vehicle back and forth two or three times over hard, level ground. Coast to a stop and stop engine (WP 0019 00). 2. Open armor skirt panel #1 (WP 0102 00). 3. Using wire brush, clean shaft (1) of track adjusting link (2). 4. Using rag, clean grease bleed valve (3), pressure relief valve (4) and grease fitting (5). 5. Connect grease gun adapter, (6) to grease fitting (5). 1 2 2 3 4 6 5 5

Privacy Statement
Press Release
Contact