TM 9--2350--292--20--1
0013 00--3
BATT/GEN GAUGE READS IN YELLOW OR LOWER RED WITH APU
RUNNING AND APU GEN SWITCH ON -- CONTINUED
0013 00
Is continuity present?
1. Disconnect harness 3W702 P4 from harness
3W132 J1.
2. Place one multimeter lead in harness 3W702
P4 socket B and other lead on harness 3W702
P3 pin A. Check for continuity.
F
no
yes
CONTINUED FROM STEP E
Repair (WP 0290 00) or
replace (WP 0311 00)
harness 3W702.
1. Reconnect harness 3W702 P3 to hydraulic
pressure switch.
2. Open air intake grilles above battery
compartment (TM 9--2350--292--10).
3. Disconnect harness 3W132 P1 from
bulkhead disconnect.
4. Place one multimeter lead on harness
3W132 J1 pin B and other lead in harness
3W132 P1 socket F. Check for continuity.
no
yes
G
Is continuity present?
CONTINUED ON NEXT PAGE
Repair (WP 0290 00) or
replace (WP 0293 00)
harness 3W132.
