TM 9--2350--292--20--1
ENGINE AIR CLEANER ASSEMBLY REPLACEMENT
0208 00
Installation--Continued
8. Install two screws (1), two new lockwashers (2) and two flat washers (3) attaching bracket (4) to damper housing
(5). Do not fully tighten screws.
9. Install four screws (13), four new lockwashers (14) and eight flat washers (15) attaching air cleaner (8) to mount-
ing bracket. Do not fully tighten screws.
10. Tighten clamp (6) securing collar (7) to air cleaner (8).
11. Tighten two screws (1) securing bracket (4) to damper housing (5).
12. Tighten screw (22) securing bracket (4) to air cleaner (8).
13. Tighten three nuts (9) securing three retaining rods (12) to air cleaner (8).
14. Tighten four screws (13) securing air cleaner (8) to mounts.
15. Ensure air cleaner (8) is sealed at upper and rear connections. Adjust with shims (16) as necessary.
16. Service air cleaner assembly (TM 9--2350--292--10).
17. Install air cleaner filter element (TM 9--2350--292--10).
Figure 20
7
9
8
12
1
2
3
4
5
22
6
13
14
15
19
16
END OF TASK
0208 00--5/6 blank
