TM 9--2350--292--20--1
0210 00--1
AIR CLEANER DAMPER, HANDLE AND SEALS REPLACEMENT
0210 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit (item 1, WP 0717 00)
Materials/Parts
Rubber seals (2) (item 46, WP 0718 00)
Rubber seal (item 47, WP 0718 00)
Rubber seal (item 48, WP 0718 00)
Materials/Parts -- Continued
Dry--cleaning solvent (item 1, WP 0716 00)
Adhesive (item 15, WP 0716 00)
Adhesive (item 82, WP 0716 00)
Removal
NOTE
The left damper requires different front and rear seals.
1. Remove two screws (1), two flat washers (2) and guard (3).
2. Remove socket head screw (4) and damper handle (5).
3. Remove damper (6), spring (7) and two bearings (8) from damper housing (9).
4. Remove seals (10 and 11) from damper housing (9). Discard seals.
5. Inspect parts for damage and replace as required.
Figure 20
9
11
8
6
8
10
7
1
2
3
4
5