TM 9--2350--292--20--1
0212 00--1
AIR CLEANER AIR INTAKE HOSES AND TUBE ASSEMBLIES
REPLACEMENT
0212 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Materials/Parts
Lockwashers (4) (item 2, WP 0718 00)
Lockwashers (4) (item 9, WP 0718 00)
Lockwashers (2) (item 12, WP 0718 00)
Round rubber sections (2) (item 36, WP 0718 00)
NOTE
Remove only those hoses and tube assemblies which
must be replaced.
Tag all hoses, tubes, brackets and clamps prior to remov-
al to aid in installation.
Removal
1. Remove engine air cleaner assembly (WP 0208 00), if required.
2. Remove APU assembly (WP 0586 00 or WP 0587 00), if required.
3. Remove engine deck (WP 0417 00), if required.
4. Remove hoses, clamps and tube assemblies in accordance with the following legend and illustration.
5. Remove mounting hardware securing hoses, clamps and tube assemblies from vehicle as shown in legend and
illustration. Discard lockwashers and round rubber sections.
6. Inspect parts for damage and replace as required.
