TM 9--2350--292--20--1
0213 00--2
TURBOCHARGER DUST DETECTOR SYSTEM REPLACEMENT --
CONTINUED
0213 00
Removal--Continued
4. Remove two hose assemblies (4) from two adapters (6).
5. Remove two adapters (6) and two preformed packings (7) from pressure switch (2). Discard preformed packings.
6. Remove screw (8) and pressure switch assembly (9) from turbocharger (5). Discard screw.
7. Remove three screws (10), three lockwashers (11) and plate (12) from pressure switch (2). Discard lockwashers.
8. Inspect parts for damage and replace as required.
Installation
1. Install plate (12) on pressure switch (2) with two screws (10) and two new lockwashers (11).
2. Install pressure switch assembly (9) on turbocharger (5) with new screw (8).
3. Install two adapters (6) with two new preformed packings (7) in pressure switch (2).
4. Install two hose assemblies (4) on two adapters (6).
Figure 23
4
4
6
6
7
7
2
8
9
12
10
11
5
