TURBOCHARGER DUST DETECTOR SYSTEM REPLACEMENT

Installation (cont) - TM-9-2350-292-20-1_1093

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
1047

TM 9--2350--292--20--1 0213 00--1 TURBOCHARGER DUST DETECTOR SYSTEM REPLACEMENT 0213 00 THIS WORK PACKAGE COVERS: Removal, Installation, Operational Test INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit (item 1, WP 0717 00) Materials/Parts Preformed packing (item 43, WP 0718 00) Preformed packing (item 381, WP 0718 00) Lockwashers (3) (item 9, WP 0718 00) Screw (item 387, WP 0718 00) Electrical tiedown straps (AR) (item 382, WP 0718 00) Equipment Conditions Engine deck assembly removed (WP 0417 00) NOTE Dust detectors are mounted to the right and left turbo- chargers. Both dust detectors are replaced in the same manner. This task replaces the left turbocharger dust detector system. Removal 1. Disconnect wiring harness 3W202 connector 510L/GND (1) from pressure switch (2). 2. Remove electrical tiedown straps (3) from two hose assemblies (4). Discard electrical tiedown straps. 3. Remove two hose assemblies (4) from turbocharger (5). Figure 23 FORWARD 1 2 3 4 4 5

Privacy Statement
Press Release
Contact