TM 9--2350--292--20--1
TURBOCHARGER DUST DETECTOR SYSTEM REPLACEMENT --
CONTINUED
0213 00
Operational Test -- Continued
7. Stop engine (TM 9--2350--292--10).
8. Loosen three captive screws (3) securing filter strip cover (1) to compressor housing (2), remove nonporous mate-
rial from over filter strip (4).
9. Tighten three captive screws (3) securing filter strip cover (1).
10. Press plunger to reset dust detector pressure switch (7).
Figure 23
2
3
1
4
7
NOTE
FOLLOW--ON MAINTENANCE:
Install engine deck assembly (WP 0417 00)
END OF TASK
0213 00--5/6 blank
