TM 9--2350--292--20--10214 00--4FILLER TUBE AND STRAINER ASSEMBLY REPLACEMENT -- CONTINUED0214 00Installation--Continued5. Apply sealing compound to male pipe threads of adapters (7 and 8). Install adapters (7 and 8).6. Connect two vent hoses (6 and 5) to adapters (7 and 8).NOTEAdjust the inner and outer grommets of the grommet as-sembly to fill the opening between the hull and filler neck.A 1/2--in. (12.7 mm) eccentric adjustment is possible.7. Install grommet assembly (2) on filler neck (4), tighten eight screws (3).8. Install filler opening cap (1) on grommet assembly (2).Figure 2412345678NOTEFOLLOW--ON MAINTENANCE:Close tank filler access cover(TM 9--2350--292--10)Install engine deck assembly (WP 0417 00)END OF TASK
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
