TM 9--2350--292--20--1
FUEL LEVEL TRANSMITTER AND FRONT FUEL TANK DRAIN PLUG
REPLACEMENT -- CONTINUED
0215 00
Installation
1. Install pipe plug (9) in front fuel tank (8).
2. Install adapter (6) and new gasket (7) with six screws (4) and six new lockwashers (5).
3. Install fuel level transmitter assembly (2) with four screws (3).
4. Connect wiring harness 4W103 wire 30 (1) to connector socket of fuel level transmitter assembly (2).
Figure 26
1
3
4
5
6
7
2
8
9
NOTE
FOLLOW--ON MAINTENANCE:
Connect APU hydraulic fluid supply line
(WP 0581 00 or WP 0582 00)
Install drain cover, if removed (WP 0453 00)
Install engine deck grilles, if removed
(TM 9--2350--292--10)
Close subfloor door #20, if opened
(TM 9--2350--292--10)
Fill fuel tanks (TM 9--2350--292--10)
END OF TASK
0215 00--3/4 blank
