TM 9--2350--292--20--1
0217 00--1
FUEL HOSE ASSEMBLIES, FITTINGS AND VALVES REPLACEMENT
0217 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Adjustable wrenches (2) (item 22, WP 0717 00)
Materials/Parts
Sealing compound (item 16, WP 0716 00)
Lockwashers (2) (item 2, WP 0718 00)
Lockwashers (5) (item 9, WP 0718 00)
Lockwashers (2) (item 12, WP 0718 00)
Lockwasher (item 58, WP 0718 00)
Marker tags (item 49, WP 0716 00)
Wiping rags (item 7, WP 0716 00)
Equipment Conditions
Powerpack removed (WP 0188 00)
For access to parts in engine compartment
Subfloor plates removed (WP 0454 00)
For access to parts under subfloor
Fuel valve control rods removed (WP 0218 00)
For replacing control valves
Fuel tanks drained (TM 9--2350--292--10)
Main hydraulic pumps and PTO clutch assemblies
removed (WP 0545 00)
References
TM 9--2350--292--10
WARNING
NOTE
Remove only those parts which must be replaced.
Tag all parts prior to removal to aid in installation.
Place rags under hose connections to catch any fuel that
spills during maintenance. Dispose of rags in accordance
with standard operating procedure.
Removal
1. Remove clamps and attaching hardware securing hose assemblies, tubes and brackets to vehicle as shown in
legend and illustration. Discard lockwashers.
2. Remove hose assemblies, tubes, brackets and fittings in accordance with the following legend and illustration.
3. Inspect parts for damage and replace as required.
