TM 9--2350--292--20--1 0217 00--4 FUEL HOSE ASSEMBLIES, FITTINGS AND VALVES REPLACEMENT -- CONTINUED 0217 00 LEGEND: NOTE A minimum of two decals shall be applied to the hose as- sembly. A decal shall be wrapped around the hose as- sembly within 5.00 inches (127.00 mm) of each end. The maximum allowable distance between decals shall be 36.00 inches (0.91 m). The word “FUEL” shall be visible after application. Install decals (41) on hose assemblies 1, 7, 25 and 31, if damaged or missing. 1. Hose assembly 21. Check valve 2. Pipe elbow 22. Street elbow 3 Spring pins (4) 23. Pipe tee 4. Pipe elbows (2) 24. Pipe elbow 5. Pipe nipples (2) 25. Hose assembly 6. Gate valves (2) 26. Pipe tee 7. Hose assemblies (2) 27. Pipe nipple 8. Pipe elbow 28. Pipe elbow 9. Nipple 29. Angle valve 10 Adapter union 30. Pipe plug 11. Screws (2) 31. Hose assembly 12. Lockwashers (2) 32. Gate valve 13. Flat washers (2) 33. Pipe elbow 14. Bracket 34. Hose assembly (fuel transfer pump) (WP 0202 00) 15. Lockwashers (2) 35. Right fuel tank 16. Nuts (4) 36. Left fuel tank 17. Adapter union 37. Fuel control valve rod assembly (Right) (WP 0218 00) 18. Adapter union 38. Fuel control valve rod assembly (Front) (WP 0218 00) 19. J--bolts (2) 39. Fuel control valve rod assembly (Drain) (WP 0218 00) 20. Pipe nipples (2) 40. Fuel control valve rod assembly (Left) (WP 0218 00) 41. Decals (As Required)