TM 9--2350--292--20--1
0219 00--1
FUEL/WATER SEPARATOR AUTOMATIC DRAIN SYSTEM AND WIRING
HARNESS E2CA128--006 REPLACEMENT
0219 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Slip joint pliers (item 88, WP 0717 00)
Materials/Parts
Lockwashers (3) (item 10, WP 0718 00)
Lockwashers (4) (item 127, WP 0718 00)
Lockwasher (item 202, WP 0718 00)
Self--locking nuts (2) (item 251, WP 0718 00)
Pressure sensitive tape (item 41, WP 0716 00)
Marker tags (item 49, WP 0716 00)
Equipment Conditions
Powerpack removed (WP 0188 00)
Fuel/water separator drained (WP 0220 00)
WARNING
NOTE
This task provides for a complete automatic drain system
replacement. Perform only those steps necessary for
maintenance or replacement of defective parts.
Perform Removal steps 1 through 4 and 18 and Installa-
tion steps 14 through 16 for maintenance of control mod-
ule.
Perform Removal steps 5 through 8 and 18 and Installa-
tion steps 2 and 10 through 13 for maintenance of sole-
noid valve.
Perform Removal steps 10 through 16 and 18 and Instal-
lation steps 1 through 8 for maintenance of drain cock
mounting bracket.
Perform Removal steps 2, 4, 5 and 18 and Installation
steps 13, 14 and 15 for maintenance of wiring harness
E2CA128--006.
Tag upper water sensor probe prior to removal, so that it
can be installed in same port during installation.
Tag all electrical components and electrical leads prior to
removal to aid in installation.
