Removal - TM-9-2350-292-20-1

FUEL VALVE CONTROL RODS AND HANDWHEEL REPLACEMENT

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
1069

TM 9--2350--292--20--1 0218 00--2 FUEL VALVE CONTROL RODS AND HANDWHEEL REPLACEMENT -- CONTINUED 0218 00 Removal--Continued 5. Remove seal (12) and bushing (13) from bulkhead rod opening. Discard seal. 6. Remove spring pin (14) and shoulder rod pin (15) from control rod assembly (10). Discard spring pin. 7. Remove two spring pins (16), shaft rod (17) and control rod (18) from universal joint (19). Discard spring pins. 8. Inspect parts for damage and replace as required. Installation 1. Install shaft rod (17) and control rod (18) on universal joint (19) with two new spring pins (16). 2. Install shoulder rod pin (15) in control rod assembly (10) with new spring pin (14). 3. Install new seal (12) and bushing (13) in bulkhead rod opening. 4. Install control rod assembly (10) in bulkhead rod opening. Figure 28 12 13 14 15 10 16 16 18 17 19

Privacy Statement
Press Release
Contact