TM 9--2350--292--20--1
0228 00--1
ENGINE EXHAUST PIPES AND INSULATION COVERS REPLACEMENT
0228 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit (item 1, WP 0717 00)
Materials/Parts
Lockwashers (15) (item 236, WP 0718 00)
Self--locking nuts (6) (item 298, 0718 00)
Materials/Parts--Continued
Gasket (item 237, Appx G)
Preformed packing (item 299, WP 0718 00)
Equipment Conditions
Engine deck assembly removed (WP
0417 00)
Transmission breather tube removed
(WP 0351 00)
For left exhaust pipe
Crankcase breather tube removed (WP
0200 00)
For right exhaust pipe
NOTE
Left and right engine exhaust pipes are replaced in the
same manner. Left side exhaust shown.
Removal
1. Remove clamp (1) and exhaust pipe cap assembly (2).
2. Remove preformed packing (3) from engine exhaust pipe (4). Discard preformed packing.
3. Remove 15 nuts (5), 15 lockwashers (6), 30 flat washers (7), 15 screws (8) and two covers
(9 and 10). Discard lockwashers.
4. Remove six self--locking nuts (11), engine exhaust pipe (4) and gasket (12). Discard self--locking nuts and gasket.
5. Inspect parts for damage and replace as required.
Figure 36
FORWARD
5
6
11
4
7
9
2
1
3
10
7
8
12