TM 9--2350--292--20--1
0245 00--3
HYDRAULIC CONTROL PANEL REPAIR -- CONTINUED
0245 00
Disassembly--Continued
NOTE
There are nine indicator lights on the hydraulic control
panel. Two are removed and disassembled in the same
manner. Perform steps 4 and 5 for removal and disas-
sembly of these indicator lights.
4. Remove lens (23), gasket (24), two screws (25), two lockwashers (26) and indicator light assembly (27) from hy-
draulic control panel (11). Discard lockwashers and gasket.
5. Remove lamp (28), retaining plate (29) and shell receptacle (30) from socket (31).
6. Remove two screws (32), two lockwashers (33) and toggle switch (34) from hydraulic control panel (11). Discard
lockwashers.
7. Remove nut (35), lockwasher (36), key washer (37) and toggle switch (38) from hydraulic control panel (11). Re-
tain attaching hardware for installation.
8. Inspect parts for damage and replace as required.
25
26
23
24
23
24
25
26
35
36
37
32
33
11
28
31
30
29
27
27
28
31
30
29
34
38
