TM 9--2350--292--20--1
0244 00--7
PTO/ACCESSORY PANEL REPAIR -- CONTINUED
0244 00
Assembly--Continued
9. Install mounting panel assembly (41) in enclosure (10) with six screws (40).
10. Install bracket (37) on enclosure (10) with four screws (38) and four new lockwashers (39).
11. Install utility outlet (35) in bracket (37) with two screws (33), two new lockwashers (34) and two nuts (36).
NOTE
There are three connector assemblies on the PTO/acces-
sory panel. All three are installed in the same manner.
Perform steps 12 and 13 to install these connector as-
semblies.
12. Install sealing plugs (32) in connector (28) as required in locations previously noted.
13. Install connectors (28, 29 or 30) with new sealing gasket (31) in enclosure (10) with four screws (26) and four new
lockwashers (27).
41
40
10
26
27
31
30
31
27
26
29
38
39
36
37
35
34
33
32
27
26
28
31