TM 9--2350--292--20--1
0244 00--3
PTO/ACCESSORY PANEL REPAIR -- CONTINUED
0244 00
Disassembly--Continued
NOTE
There are three connector assemblies on the PTO/
accessory panel. All three are removed in the same
manner. Perform step 7 to remove these connector
assemblies.
7. Remove four screws (26), four lockwashers (27), connector (28, 29 or 30) and sealing gasket (31) from enclosure
(10). Discard lockwashers and gasket.
NOTE
Note location of plugs to aid in installation of new
connector.
8. Remove sealing plugs (32) from connector (28) as required.
9. Remove two screws (33), two lockwashers (34), utility outlet (35) and two nuts (36) from bracket (37). Discard
lockwashers.
10. Remove four screws (38), four lockwashers (39) and bracket (37) from enclosure (10). Discard lockwashers.
11. Remove six screws (40) and mounting panel assembly (41) from enclosure (10).
41
40
10
26
27
31
30
31
27
26
29
38
39
36
37
35
34
33
32
27
26
28
31
