TM 9--2350--292--20--1
0244 00--4
PTO/ACCESSORY PANEL REPAIR -- CONTINUED
0244 00
Disassembly--Continued
NOTE
There are five circuit breakers on the mounting panel. All
five are removed in the same manner. Perform step 12 to
remove these circuit breakers.
12. Remove two screws (42), two lockwashers (43) and circuit breaker (44) from mounting panel (45). Discard lock-
washers.
NOTE
There are two relays on the mounting panel. Both are
removed in the same manner. Perform step 13 to re-
move either of these relays.
13. Remove two screws (46) and relay (47) from mounting panel (46).
NOTE
There are two rack assemblies on the mounting panel. Both are
removed and disassembled in the same manner. Perform steps 14
and 15 for removal and disassembly of either rack assembly.
Note placement of terminal junctions on rack assembly (49) prior to
disassembly.
14. Remove two screws (48) and rack assembly (49) from mounting panel (45).
15. Remove terminal junctions (50) from rack assembly (49).
NOTE
Note location of plugs to aid in installation of new terminal
junctions.
16. Remove sealing plugs (51) from terminal junctions (50) as required.
49
48
50
51
50
51
50
44
46
47
47
46
45
42
43
K1
K2
