HARNESS BRACKET REPLACEMENT

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
1237

TM 9--2350--292--20--1 0246 00--1 HARNESS BRACKET REPLACEMENT 0246 00 THIS WORK PACKAGE COVERS: Removal, Installation INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit (item 1, WP 0717 00) Materials/Parts Lockwashers (3) (item 9, WP 0718 00) Electrical tiedown strap (item 205, WP 0718 00) Equipment Conditions Vehicle MASTER switch OFF (TM 9--2350--292--10) Hydraulic control panel removed (WP 0245 00) References TM 9--2350--292--10 Removal 1. Remove screw (1), flat washer (2), lockwasher (3), nut (4), electrical tiedown strap (5) and clamp (6) from har- ness bracket (7). Discard lockwasher and electrical tiedown strap. 2. Remove two screws (8), two flat washers (9), two lockwashers (10), two nuts (11) and harness bracket (7). Discard lockwashers. 3. Inspect parts for damage and replace as required. Figure 63 1 2 3 4 5 6 8 7 9 10 11

Privacy Statement
Press Release
Contact