TM 9--2350--292--20--1
0247 00--4
APU CONTROL BOX AND APU CONTROL BOX BRACKET REPAIR --
CONTINUED
0247 00
Disassembly--Continued
7. Remove two screws (33), two lockwashers (34), switch guard (35) and fuel shutoff switch (36) from enclosure as-
sembly (19). Discard lockwashers.
8. Remove lead assembly 4W123--3 (37) from fuel shutoff switch (36).
9. Remove nut (38), lockwasher (39), tanged washer (40), switch guard (41) and switch assembly (42) from enclo-
sure assembly (19). Do not discard lockwasher unless replacing switch assembly.
10. Remove two plugs (43) from switch assembly (42).
NOTE
Wiring harness 4W725 GND is secured to light assembly.
If wiring harness 4W725 has been removed, only one
screw and lockwasher are required to remove light as-
sembly.
11. Remove lens (44), gasket (45), gasket (46), lamp (47), two screws (48), two lockwashers (49), terminal (50), lock-
washer (51) and light socket assembly (52) from enclosure assembly (19). Discard lockwashers and gaskets.
12. Remove electrical bond nut (53), lockwasher (54) and socket (55) from retaining strap (56). Discard lockwasher.
Figure 66
51
50
47
46
45
44
36
37
48
49
33
34
35
38
39
40
41
19
42
43
53
54
56
55
52
