ANTENNA BASE ACCESS COVER REPLACEMENT (cont)

Installation (cont) - TM-9-2350-292-20-1_1362

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
1313

TM 9--2350--292--20--1 ANTENNA BASE ACCESS COVER REPLACEMENT 0272 00 THIS WORK PACKAGE COVERS: Removal, Installation INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit (item 1, WP 0717 00) Materials/Parts Gasket (item 416, WP 0718 00) Lockwashers (4) (item 2, WP 0718 00) Equipment Conditions Vehicle MASTER switch OFF (TM 9--2350--292--10) References TM 9--2350--292--10 NOTE There are two identical antenna base access covers. This task replaces one antenna base access cover. Removal 1. Remove four screws (1), four lockwashers (2), antenna base access cover (3) and gasket (4) from hull (5). Dis- card lockwashers and gasket. 2. Inspect parts for damage and replace as required. Installation Install antenna base access cover (3) on hull (5) with four screws (1), four new lockwashers (2), and new gasket (4). Figure 82 1 2 3 4 5 END OF TASK 0272 00--1/2 blank

Privacy Statement
Press Release
Contact