TM 9--2350--292--20--1
0274 00--2
HEADLIGHT BASE ASSEMBLY 4W159 REPAIR -- CONTINUED
0274 00
Disassembly
1. Remove spring (9) and two assembled--washer screws (10) from base (11). Discard screws.
2. Remove gasket (12) from base (11). Discard gasket.
3. Carefully remove wiring harness 4W159 (13) from base (11) in accordance with Electrical Schematic FP--1.
4. Inspect parts for damage and replace as required.
Assembly
NOTE
Lead 19 of base assembly is not used. Seal off using
shell and plug (right side only).
1. Carefully install wiring harness 4W159 (13) into base (11) in accordance with Electrical Schematic FP--1.
2. Install new gasket (12) on base (11).
3. Install spring (9) and two new assembled--washer screws (10) on base (11).
Figure 84
9
10
11
12
13
