TM 9--2350--292--20--1
0276 00--2
RIGHT AND LEFT REAR STOP LIGHTS AND STAYLINE CYLINDER ACCESS
COVERS REPAIR -- CONTINUED
0276 00
Removal
1. Disconnect wiring harness 3W142 wires 24, 23, 21, 22/460 or 22/461 (1) from taillight electrical connectors (2).
2. Remove two screws (3), two lockwashers (4), two lead assemblies 1W134 GND (5), two flat washers (6), two
bushings (7), two grommets (8) and taillight assembly (9) from mounting bracket (10). Discard lockwashers,
bushings and grommets.
3. Remove two nuts (11), two lockwashers (12), two lead assemblies 1W134 GND (5) and two lockwashers (13)
from mounting bracket (10). Discard lockwashers.
4. Remove four screws (14), four lockwashers (15) and two access plates (16) from vehicle. Discard lockwashers.
5. Remove two grommets (17) from two access plates (16). Discard grommets.
Figure 85
1
2
3
4
5
6
7
8
3
4
5
6
7
8
9
10
11
11
12
12
13
13
17
14
15
16
