TM 9--2350--292--20--1
EMERGENCY FLASHER LAMP ASSEMBLY REPAIR -- CONTINUED
0277 00
Assembly--Continued
4. Connect lead (13) to electrical connector (2).
5. Install headlight (11) in lens retainer (8) with three retaining clips (10).
6. Install lens retainer (8) on light housing (9) with three screws (7).
Installation
1. Install lamp assembly (3) in vehicle with new finishing washer (6), new lockwasher (5) and nut (4).
2. Connect wiring harness 4W101 wire 325A (1) to electrical connector (2) in rear of light assembly (3).
Figure 87
7
8
11
10
13
2
9
6
5
4
10
1
3
NOTE
FOLLOW--ON MAINTENANCE:
Connect battery power (WP 0256 00)
END OF TASK
0277 00--3/4 blank
