HEADLIGHT SEALED--BEAM, MARKER ASSEMBLY AND INCANDESCENT LAMPS REPLACEMENT

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
1326

TM 9--2350--292--20--1 0275 00--1 HEADLIGHT SEALED--BEAM, MARKER ASSEMBLY AND INCANDESCENT LAMPS REPLACEMENT 0275 00 THIS WORK PACKAGE COVERS: Removal, Installation INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit (item 1, WP 0717 00) Equipment Conditions Vehicle MASTER switch OFF (TM 9--2350--292--10) Main light switch OFF (TM 9--2350--292--10) References TM 9--2350--292--10 NOTE IR headlights are non--operational and may be used as spare service headlights. Removal 1. Loosen four screws (1) and remove cover (2) from headlight body (3). 2. Remove two sealed--beam units (4) from headlight body (3). 3. Disconnect two electrical connectors (5) from two sealed--beam units (4). 4. Remove two gaskets (6) from two sealed--beam units (4). 5. Remove lamp (7) and marker assembly (8) from headlight body (3). 6. Inspect parts for damage and replace as required. Figure 83 1 2 3 4 5 5 6 7 8

Privacy Statement
Press Release
Contact