BILGE PUMP LIGHT FAILS TO OPERATE. ALL OTHER ACCESSORY LIGHTS OPERATE

BILGE PUMP FAILS TO OPERATE (cont) - TM-9-2350-292-20-1_194

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
151

TM 9--2350--292--20--1 BILGE PUMP LIGHT FAILS TO OPERATE. ALL OTHER ACCESSORY LIGHTS OPERATE. 0031 00 THIS WORK PACKAGE COVERS: Bilge Pump Light Fails To Operate. All Other Accessory Lights Operate INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit (item 1, WP 0717 00) Multimeter (item 84, WP 0717 00) Equipment Conditions Vehicle MASTER switch OFF (TM 9--2350--292--10) Accessory panel open (TM 9--2350--292--10) LED replaced (TM 9--2350--292--10) Personnel Required Two Replace light socket (WP 0244 00). Verify fault is corrected. Repair (WP 0290 00) or replace (WP 0244 00) lead to light socket. Verify fault is corrected. no yes Is 24 V dc present? 1. Turn MASTER switch and BILGE PUMP switch ON (TM 9--2350--292--10). 2. Place multimeter red lead on light lead terminal 1 and black lead to ground. Check for voltage. 3. Turn MASTER switch and BILGE PUMP switch OFF (TM 9--2350--292--10). WARNING Remove rings, bracelets, wristwatches, and neck chains before working on any vehicle. Jewelry can catch on equip- ment and cause injury, or may short across an electrical circuit and cause severe burns or electrical shock. END OF TASK 0031 00--1/2 blank

Privacy Statement
Press Release
Contact