TM 9--2350--292--20--1
0030 00--2
BILGE PUMP FAILS TO OPERATE -- CONTINUED
0030 00
CONTINUED FROM STEP A
no
yes
Replace bilge pump
relay (WP 0264 00).
Verify fault is corrected.
B 1. Remove subfloor plate 18 (WP 0454 00).
2. Disconnect harness 4W136 P2 from bilge
pump relay.
3. Turn MASTER switch and BILGE PUMP
switch ON (TM 9--2350--292--10).
4. Place multimeter red lead in harness 4W136
P2 socket B and black lead to ground.
Check for voltage.
5. Turn MASTER switch and BILGE PUMP
switch OFF (TM 9--2350--292--10).
Is 24 V dc present?
CONTINUED ON NEXT PAGE