TM 9--2350--292--20--1
0030 00--1
BILGE PUMP FAILS TO OPERATE.
0030 00
THIS WORK PACKAGE COVERS:
Bilge Pump Fails To Operate
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Multimeter (item 84, WP 0717 00)
Equipment Conditions
Vehicle MASTER switch OFF (TM 9--2350--292--10)
Personnel Required
Two
Is 24 V dc present?
1. Remove subfloor plate 7 (WP 0454 00).
2. Disconnect harness 4W136 P1 from bilge
pump.
3. Turn MASTER switch and BILGE PUMP
switch ON (TM 9--2350--292--10).
4. Place multimeter red lead in harness 4W136
P1 and black lead to ground. Check for
voltage.
5. Turn MASTER switch and BILGE PUMP
switch OFF (TM 9--2350--292--10).
no
yes
Replace bilge pump
(WP 0667 00). Verify
fault is corrected.
A
CONTINUED ON NEXT PAGE
WARNING
Remove rings, bracelets, wristwatches,
and neck chains before working on any
vehicle. Jewelry can catch on equip-
ment and cause injury, or may short
across an electrical circuit and cause
severe burns or electrical shock.
