BILGE PUMP FAILS TO OPERATE (cont) - TM-9-2350-292-20-1

BILGE PUMP FAILS TO OPERATE (cont) - TM-9-2350-292-20-1_190

BILGE PUMP FAILS TO OPERATE (cont) - TM-9-2350-292-20-1_192

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
147

TM 9--2350--292--20--1 0030 00--3 BILGE PUMP FAILS TO OPERATE -- CONTINUED 0030 00 CONTINUED FROM STEP B C 1. Disconnect lead 451A from 50--amp circuit breaker. 2. Turn MASTER switch and BILGE PUMP switch ON (TM 9--2350--292--10). 3. Place multimeter red lead on lead 451A circuit breaker connector pin and black lead to ground. Check for voltage. 4. Turn MASTER switch and BILGE PUMP switch OFF (TM 9--2350--292--10). Is 24 V dc present? no yes D 1. Turn MASTER switch ON (TM 9--2350--292--10). 2. Place multimeter red lead on lead 450A terminal and black lead to ground. Check for voltage. 3. Turn MASTER switch OFF (TM 9--2350--292--10). Is 24 V dc present? no yes Replace circuit breaker (WP 0264 00). Verify fault is corrected. Repair (WP 0290 00) or replace (WP 0325 00) harness 4W136. Verify fault is corrected. CONTINUED ON NEXT PAGE

Privacy Statement
Press Release
Contact