TM 9--2350--292--20--1
0045 00--5
ENGINE FAILS TO SHUTOFF WHEN SHUTOFF SWITCH IS ACTIVATED --
CONTINUED
0045 00
Is 24 V dc present?
no
yes
I
Is 24 V dc present?
1. Reconnect harness 3W132 P1 to bulkhead
disconnect.
2. Remove engine deck (WP 0417 00).
3. Disconnect harness 3W143 P1 at engine
disconnect.
4. Turn MASTER switch and FUEL SHUTOFF
switch ON (TM 9--2350--292--10).
5. Place multimeter red lead in harness 3W143 P1
pin M and black lead to ground. Check for
voltage.
6. Turn MASTER switch and FUEL SHUTOFF
switch OFF (TM 9--2350--292--10).
J
no
yes
CONTINUED FROM STEP H
Repair (WP 0290 00) or
replace (WP 0293 00)
harness 3W132. Verify
fault is corrected.
1. Reconnect harness 3W143 P1 to engine
disconnect.
2. Disconnect harness 3W202 from fuel shutoff
solenoid.
3. Turn MASTER switch and FUEL SHUTOFF
switch ON (TM 9--2350--292--10).
4. Place multimeter red lead in harness 3W202
socket A of solenoid connector and black lead to
ground. Check for voltage.
5. Turn MASTER switch and FUEL SHUTOFF
switch OFF (TM 9--2350--292--10).
CONTINUED ON NEXT PAGE
Repair (WP 0290 00) or
replace (WP 0295 00)
harness 3W143. Verify
fault is corrected.
FORWARD
