TM 9--2350--292--20--1
0082 00--1
ENGINE BATT/GEN GAUGE READS IN YELLOW OR LOWER RED REGION
WITH MAIN ENGINE RUNNING
0082 00
THIS WORK PACKAGE COVERS:
Engine BATT/GEN Gauge Reads In Yellow or lower Red Region With Main Engine Running
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Multimeter (item 84, WP 0717 00)
STE--ICE--R (item 85, WP 0717 00)
Engine ground hop kit (item 14, WP 0717 00)
Equipment Conditions
Vehicle MASTER switch OFF (TM 9--2350--292--10)
Personnel Required
Two
Is STE--ICE--R available?
no
yes
Go to Step K.
A
B 1. Setup STE--ICE--R for operation
(TM 9--4910--571--12&P).
2. Connect STE--ICE--R harness W1 to vehicle
harness 4W800 J1 DCA connector.
3. Enter vehicle ID (VID) 04 and perform
STE--ICE--R test 67 (TM 9--4910--571--12&P)
and record results.
Is VTM reading between 27 and 30 V dc static?
no
yes
CONTINUED ON NEXT PAGE
WARNING
Remove rings, bracelets, wristwatches,
and neck chains before working on any
vehicle. Jewelry can catch on equip-
ment and cause injury, or may short
across an electrical circuit and cause
severe burns or electrical shock.
Go to Step E.
Perform STE--ICE--R test 67 using function 02
(TM 9--4910--571--12&P) while cranking engine
and holding fuel shutoff control. Record results.
no
yes
Go to Step E.
C
Is VTM reading at least 18 V dc?
