TM 9--2350--292--20--1
0082 00--5
ENGINE BATT/GEN GAUGE READS IN YELLOW OR LOWER RED REGION
WITH MAIN ENGINE RUNNING -- CONTINUED
0082 00
CONTINUED FROM STEP L
CONTINUED ON NEXT PAGE
no
yes
Repair (WP 0290 00) or
replace (WP 0242 00) lead
1A from harness 4W109 J3
to switch S4 connector.
Verify fault is corrected.
M
1. Disconnect lead 1A from switch S4.
2. Place one multimeter lead in lead 1A switch
connector and other lead on harness 4W109
J3 pin N. Check for continuity.
Is continuity present?
N
Is continuity present?
yes
Replace switch S4 (WP
0242 00). Verify fault is
corrected.
1. Disconnect lead 76 from circuit breaker side of
switch S4.
2. Place one multimeter lead on each switch S4
connector pin. Check for continuity.
no
O
1. Open air intake grilles above battery
compartment (TM 9--2350--292--10).
2. Disconnect harness 3W132 P1 at bulkhead
disconnect.
3. Place one multimeter lead in harness 4W101 P1
socket N and other lead in socket B of harness
3W132 P1. Check for continuity.
Is continuity present?
Repair (WP 0290 00) or
replace (WP 0315 00)
harness 4W101. Verify
fault is corrected.
yes
no
CONTINUED
FROM STEP L
