ENGINE BATT/GEN GAUGE READS IN YELLOW OR LOWER RED REGION WITH MAIN ENGINE RUNNING (cont)

ENGINE BATT/GEN GAUGE READS IN YELLOW OR LOWER RED REGION WITH MAIN ENGINE RUNNING (cont) - TM-9-2350-292-20-1_378

ENGINE BATT/GEN GAUGE READS IN YELLOW OR LOWER RED REGION WITH MAIN ENGINE RUNNING (cont) - TM-9-2350-292-20-1_380

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
335

TM 9--2350--292--20--1 0082 00--7 ENGINE BATT/GEN GAUGE READS IN YELLOW OR LOWER RED REGION WITH MAIN ENGINE RUNNING -- CONTINUED 0082 00 CONTINUED FROM STEP R S Is continuity present? no yes Repair (WP 0290 00) or replace (WP 0327 00) harness 4W153. Verify fault is corrected. Place one multimeter lead in harness 3W132 P1 socket H and other lead in harness 4W153 P1 sock- et D. Check for continuity. CONTINUED ON NEXT PAGE no yes Go to Step W. T 1. Place GENERATOR switch in ON position (TM 9--2350--292--10). 2. Place one multimeter lead on accessory panel receptacle J3 pin C and other lead on receptacle J3 pin D. Check for continuity. 3. Place GENERATOR switch in OFF position (TM 9--2350--292--10). Is continuity present? U Is continuity present? no yes Repair (WP 0290 00) or replace (WP 0244 00) lead 1 to switch S4. Verify fault is corrected. 1. Remove accessory panel (WP 0244 00) and disconnect lead 1 from switch S4 at receptacle J3 pin C side. 2. Place one multimeter lead on receptacle J3 pin C and other lead in lead 1 switch S4 connector. Check for continuity.

Privacy Statement
Press Release
Contact