ENGINE BATT/GEN GAUGE READS IN YELLOW OR LOWER RED REGION WITH MAIN ENGINE RUNNING (cont)

ENGINE BATT/GEN GAUGE READS IN YELLOW OR LOWER RED REGION WITH MAIN ENGINE RUNNING (cont) - TM-9-2350-292-20-1_379

ENGINE BATT/GEN GAUGE READS IN YELLOW OR LOWER RED REGION WITH MAIN ENGINE RUNNING (cont) - TM-9-2350-292-20-1_381

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
336

TM 9--2350--292--20--1 0082 00--8 ENGINE BATT/GEN GAUGE READS IN YELLOW OR LOWER RED REGION WITH MAIN ENGINE RUNNING -- CONTINUED 0082 00 CONTINUED FROM STEP U V 1. Disconnect lead 1 from switch S4 at receptacle pin D side. 2. Place one multimeter lead on receptacle J3 pin D and other lead in lead 1 switch S4 connector. Check for continuity. Is continuity present? Repair (WP 0290 00) or replace (WP 0244 00) lead 1 to switch S4. Verify fault is corrected. Replace switch S4 (WP 0244 00). Verify fault is corrected. yes no CONTINUED ON NEXT PAGE CONTINUED FROM STEP T 1. Reconnect harness 4W153 P1 to accessory panel. 2. Disconnect harness 3W143 P1 from engine disconnect. 3. Place one multimeter lead in harness 3W132 P1 socket H and other lead in harness 3W143 P1 socket Z. Check for continuity. Is continuity present? W 1. Reconnect harness 3W132 P1 at bulkhead disconnect. 2. Place one multimeter lead in harness 3W143 P1 socket Y and other lead on harness 3W180 P1 socket B. Check for continuity. X Is continuity present? no yes Repair (WP 0290 00) or replace (WP 0295 00) harness 3W143. Verify fault is corrected. Repair (WP 0290 00) or replace (WP 0295 00) harness 3W143. Verify fault is corrected. no yes

Privacy Statement
Press Release
Contact