TM 9--2350--292--20--1
0106 00--6
FUEL TRANSFER PUMP FAILS TO OPERATE -- CONTINUED
0106 00
CONTINUED FROM STEP M
Are connections tight and free of damage?
Check pressure hose connections for the flow
regulator valve, flow control valve and impact
wrench pressure port for leaks and loose or
damaged connectors.
N
no
yes
Tighten loose connections
and/or replace damaged
parts (WP 0555 00). Verify
fault is corrected.
Go to page
(WP 0089 00).
CONTINUED FROM STEP K
Are pressures at both ports approximately the same?
1. Start Enhanced Diagnostic System program
(WP 0086 00) and select the corresponding
symptom.
2. Perform step I steps 3 through 6 and record
pressures at test port R1 and impact wrench
return port.
O
no
yes
Go to Step M.
Replace hydraulic filters
(WP 0554 00). Verify fault
is corrected.
END OF TASK