TM 9--2350--292--20--1
0106 00--1
FUEL TRANSFER PUMP FAILS TO OPERATE.
0106 00
THIS WORK PACKAGE COVERS:
Fuel Transfer Pump Fails To Operate
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, (WP 0717 00)
0--4000 psi testing gauge assembly (2)
(item 82, (WP 0717 00)
0--300 psi dial pressure gauge (2)
(item 81, (WP 0717 00)
1/2--inch plugs (2) (item 69, (WP 0716 00)
Safety goggles (item 93, (WP 0716 00)
Equipment Conditions
Vehicle MASTER switch OFF (TM 9--2350--292--10)
Personnel Required
Two
Does impact wrench operate properly?
1. Connect impact wrench (TM 9--2350--292--10).
2. Start APU (TM 9--2350--292--10).
3. Operate impact wrench (TM 9--2350--292--10).
4. Shut down APU (TM 9--2350--292--10).
no
yes
no
yes
A
B
CONTINUED ON NEXT PAGE
1. Set flow regulator control handle to 0.5.
2. Open air intake doors (TM 9--2350--292--10).
3. Start APU (TM 9--2350--292--10).
4. Place fuel pump control to DEFUEL then to
REFUEL while observing transfer pump input
shaft and hydraulic motor output shaft.
5. Shut down APU (TM 9--2350--292--10).
Do both shafts turn simultaneously?
Go to Step H.
Go to Step D.
WARNING
WARNING
Remove rings, bracelets, wristwatches, and
neck chains before working on any vehicle.
Jewelry can catch on equipment and cause
injury, or may short across an electrical circuit
and cause severe burns or electrical shock.
FORWARD
