TM 9--2350--292--20--1
0105 00--1
SPADE LOCK FAILS TO RELEASE.
0105 00
THIS WORK PACKAGE COVERS:
Spade Lock Fails To Release.
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit (item 1, (WP 0717 00)
0--4000 psi testing gauge assembly
(item 82, (WP 0717 00)*
1/4--inch tee (item 71, (WP 0716 00)*
Crowbar (item 52, (WP 0717 00)
Safety goggles (item 93, (WP 0716 00)
Equipment Conditions
Vehicle MASTER switch OFF (TM 9--2350--292--10)
Personnel Required
Two
Is vehicle equipped with Enhanced Diagnostic
System?
no
yes
A
CONTINUED ON NEXT PAGE
Go to Step H.
WARNING
WARNING
Remove rings, bracelets, wristwatches, and
neck chains before working on any vehicle.
Jewelry can catch on equipment and cause
injury, or may short across an electrical circuit
and cause severe burns or electrical shock.
Is quick--disconnect and hose free from restrictions and
damage?
1. Using crowbar, pry down on spade lock and
disengage lock.
2. Lower the spade (TM 9--2350--292--10) and
remove nose piece (WP 0497 00).
3. Inspect spade lock cylinder quick--disconnect
and hose for leaks, restrictions, and damage.
no
yes
B
Tighten leaking connections and remove
restrictions. If restrictions cannot be re-
moved or if parts are damaged, replace
(WP 0575 00). Verify fault is corrected.
FORWARD