TM 9--2350--292--20--1
IMPACT WRENCH FAILS TO OPERATE OR DEVELOP FULL POWER --
CONTINUED
0107 00
CONTINUED FROM STEP G
J
Is pressure at port RI filter manifold approximately the
same as at impact wrench return port?
1. Start Enhanced Diagnostic System program
(WP 0000 00) and select the corresponding
symptom.
2. Remove 0--4000 psi testing gauge assembly
from impact wrench pressure port.
3. Perform Step C steps 3 thru 5.
yes
no
Go to Step I.
Replace hydraulic filters
(WP 0554 00). Verify
fault is corrected.
END OF TASK
0107 00--5/6 blank