TM 9--2350--292--20--1
0129 00--2
FUEL GAUGE FAILS TO OPERATE PROPERLY -- CONTINUED
0129 00
CONTINUED FROM STEPS A AND B
CONTINUED ON NEXT PAGE
Is continuity present?
no
yes
1. Disconnect lead 25/27 from CB6.
2. Place one multimeter lead on each CB6
connector pin. Check for continuity.
Replace CB6 (WP 0242 00).
Verify fault is corrected.
no
yes
1. Remove switch panel from bracket
(WP 0242 00) and reconnect ground strap to
switch panel.
2. Disconnect lead 10 from CB6 inside switch
panel.
3. Turn MASTER switch ON
(TM 9--2350--292--10).
4. Place red multimeter lead in lead 10 connector
socket at CB6. Check for voltage.
5. Turn MASTER switch OFF
(TM 9--2350--292--10).
Is 24 V dc present?
Go to Step E.
C
D
