TM 9--2350--292--20--1
0129 00--3
FUEL GAUGE FAILS TO OPERATE PROPERLY -- CONTINUED
0129 00
E
Is continuity present?
CONTINUED FROM STEPS C AND D
no
yes
CONTINUED ON NEXT PAGE
1. Disconnect lead 28 from switch S4.
2. Disconnect lead 30 from switch S4.
3. Turn switch S4 to FRONT position
(TM 9--2350--292--10).
4. Place one multimeter lead on each switch S4
connector pin. Check for continuity.
Replace switch S4
(WP 0243 00). Verify
fault is corrected.
F
Is continuity present?
no
yes
1. Reconnect lead 28 to switch S4.
2. Disconnect harness 4W103 P1 from gauge
panel.
3. Place one multimeter lead in lead 30 switch S4
connector socket and other lead on harness
4W152 J1 pin M. Check for continuity.
Repair (WP 0290 00) or
replace (WP 0243 00)
lead 30. Verify fault is
corrected.
