TM 9--2350--292--20--1 0131 00--3 TURBOCHARGER DUST DETECTOR INDICATOR LIGHT FAILS TO OPERATE -- CONTINUED 0131 00 E Is continuity present? CONTINUED FROM STEP D no yes CONTINUED ON NEXT PAGE 1.   Disconnect lead 10 from CB6. 2.   Place one multimeter lead in harness 4W151 J4 pin N and other lead in lead 10 CB6 connector socket. Check for continuity. Repair (WP 0290 00) or replace (WP 0242 00) lead 10. Verify fault is corrected. F Is continuity present? no yes 1.   Disconnect lead 25/27 from CB6. 2.   Place one multimeter lead on each CB6 connector pin. Check for continuity. 3.   Reconnect lead 10 and lead 25/27 to CB6. Replace CB6 (WP 0242 00). Verify fault is corrected. G Is continuity present? no yes 1.   Disconnect lead 25/27 from CB6. 2.   Place one multimeter lead in lead 25/27 CB6 connector socket and other lead in harness 4W151 J4 pin K. Check for continuity. Repair (WP 0290 00) or replace (WP 0242 00) lead 25/27. Verify fault is corrected. CONTINUED FROM STEP B Go to Step G. Go to Step M. CONTINUED FROM STEP E