TURBOCHARGER DUST DETECTOR INDICATOR LIGHT FAILS TO OPERATE (cont)

TURBOCHARGER DUST DETECTOR INDICATOR LIGHT FAILS TO OPERATE (cont) - TM-9-2350-292-20-1_651

TURBOCHARGER DUST DETECTOR INDICATOR LIGHT FAILS TO OPERATE (cont) - TM-9-2350-292-20-1_653

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
608

TM 9--2350--292--20--1 0131 00--4 TURBOCHARGER DUST DETECTOR INDICATOR LIGHT FAILS TO OPERATE -- CONTINUED 0131 00 H Is continuity present? CONTINUED FROM STEP G no yes CONTINUED ON NEXT PAGE 1. Reconnect lead 25/27 to CB6. 2. Disconnect harness 4W103 P1 from gauge panel. 3. Place one multimeter lead on harness 4W105 P1 socket K and other lead in harness 4W103 P1 socket K. Check for continuity. Repair (WP 0290 00) or replace (WP 0316 00) harness 4W103. Verify fault is corrected. I Is continuity present? no yes 1. Reconnect harness 4W105 P1 to switch panel. 2. Place one multimeter lead on harness 4W152 J1 pin K and other lead in lead 27 light connector socket. Check for continuity. Repair (WP 0290 00) or re- place (WP 0243 00) lead 27. Verify fault is corrected. J Is continuity present? no yes 1. Disconnect lead 510 from indicator L2. 2. Place one multimeter lead in lead 510 indicator L2 connector socket and other lead on harness 4W152 J1 pin C. Check for continuity. Repair (WP 0290 00) or replace (WP 0243 00) lead 510. Verify fault is corrected. CONTINUED FROM STEP C

Privacy Statement
Press Release
Contact