LEVEL WINDER MALFUNCTION INDICATOR FAILS TO LIGHT WHEN LEVEL WINDER MALFUNCTIONS

WINCH ELECTRICAL SYSTEM OVERVIEW AND DIAGRAMS (cont)

LEVEL WINDER MALFUNCTION INDICATOR FAILS TO LIGHT WHEN LEVEL WINDER MALFUNCTIONS (cont) - TM-9-2350-292-20-1_786

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
741

TM 9--2350--292--20--1 0179 00--1 LEVEL WINDER MALFUNCTION INDICATOR FAILS TO LIGHT WHEN LEVEL WINDER MALFUNCTIONS. 0179 00 THIS WORK PACKAGE COVERS: Level Winder Malfunction Indicator Fails To Light When Level Winder Malfunctions INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit (item 1, WP 0717 00) Multimeter (item 84, WP 0717 00) Equipment Conditions Vehicle MASTER switch OFF (TM 9--2350--292--10) Main winch and spade assembly removed from vehicle (WP 0497 00) Personnel Required Two Do switches make contact? Check level wind guide to make sure warning switches make contact with winder roller guide. no yes no yes A B CONTINUED ON NEXT PAGE 1. Turn MASTER switch ON (TM 9--2350--292--10). 2. Press and hold lamp test switch on accessory control panel in the TEST position. 3. Turn MASTER switch OFF (TM 9--2350--292--10). Does LEVEL WINDER MALFUNCTION indicator light? WARNING Remove rings, bracelets, wristwatches, and neck chains before working on any vehicle. Jewelry can catch on equip- ment and cause injury, or may short across an electrical circuit and cause severe burns or electrical shock. Adjust level winder warning switch (WP 0509 00). Verify fault is corrected. Replace indicator lamp (WP 0244 00). Verify fault is corrected.

Privacy Statement
Press Release
Contact