WINCH DRUM MALFUNCTION INDICATOR FAILS TO LIGHT WHEN WINCH DRUM MALFUNCTIONS

LEVEL WINDER MALFUNCTION INDICATOR FAILS TO LIGHT WHEN LEVEL WINDER MALFUNCTIONS (cont) - TM-9-2350-292-20-1_788

WINCH DRUM MALFUNCTION INDICATOR FAILS TO LIGHT WHEN WINCH DRUM MALFUNCTIONS (cont) - TM-9-2350-292-20-1_790

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
745

TM 9--2350--292--20--1 0180 00--1 WINCH DRUM MALFUNCTION INDICATOR FAILS TO LIGHT WHEN WINCH DRUM MALFUNCTIONS. 0180 00 THIS WORK PACKAGE COVERS: Winch Drum Malfunction Indicator Fails To Light When Winch Drum Malfunctions INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit (item 1, WP 0717 00) Multimeter (item 84, WP 0717 00) Equipment Conditions Vehicle MASTER switch OFF (TM 9--2350--292--10) Main winch and spade assembly removed from vehicle (WP 0497 00) Personnel Required Two Do switches make contact? Check winch roller spring guide brackets to make sure they make contact with the winch layer limit switches. no yes no yes A B CONTINUED ON NEXT PAGE 1. Turn MASTER switch ON (TM 9--2350--292--10). 2. Hold the LAMP TEST switch on the accessory control panel in the TEST position. 3. Release the lamp test switch. 4. Turn MASTER switch OFF (TM 9--2350--292--10). Does WINCH DRUM MALFUNCTION indicator light? WARNING Remove rings, bracelets, wristwatches, and neck chains before working on any vehicle. Jewelry can catch on equip- ment and cause injury, or may short across an electrical circuit and cause severe burns or electrical shock. Adjust layer limit switches (WP 0503 00). Verify fault is corrected. Replace indicator lamp (WP 0244 00). Verify fault is corrected.

Privacy Statement
Press Release
Contact