TM 9--2350--292--20--1
0180 00--4
WINCH DRUM MALFUNCTION INDICATOR FAILS TO LIGHT WHEN WINCH
DRUM MALFUNCTIONS -- CONTINUED
0180 00
CONTINUED FROM STEP C AND F
G
Is 24 V dc present at both checks?
yes
no
1. Reconnect lead 10 connectors and lead
361A and 361B connectors of harness
2W602 to warning switches.
2. Turn MASTER switch ON
(TM 9--2350--292--10).
3. Place multimeter red lead in harness 2W601
J1 sockets E and F (one at a time) while
holding black lead to ground. Check for
voltage.
4. Turn MASTER switch OFF
(TM 9--2350--292--10).
Repair (WP 0290 00) or
replace (WP 0291 00)
harness 2W601. Verify
fault is corrected.
CONTINUED ON NEXT PAGE
H
Is continuity present at both checks?
no
yes
1. Disconnect harness 2W601 P1 from
accessory control panel bracket.
2. Place one multimeter lead in socket L of
harness 2W601 J1 and other lead in harness
2W601 P1 socket R. Check for continuity.
3. Place one multimeter lead in socket K of
harness 2W601 J1 and other lead in harness
2W601 P1 socket X. Check for continuity.
Repair (WP 0290 00) or
replace (WP 0291 00)
harness 2W601. Verify
fault is corrected.